2
Need help? www.WilsonElectronics.com Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
IT IS VERY IMPORTANT
TO POWER YOUR SIGNAL
BOOSTER USING A SURGE
PROTECTED AC POWER
STRIP WITH AT LEAST A 1000
JOULE RATING.
FAILURE TO DO THIS WILL VOID YOUR WARRANTY
IN THE EVENT OF A POWER SURGE OR LIGHTNING
STRIKE.
! !
THE SIGNAL BOOSTER UNIT IS DESIGNED
FOR USE IN AN INDOOR, TEMPERATURE-
CONTROLLED ENVIRONMENT (LESS
THAN 150 DEGREES FAHRENHEIT). IT IS
NOT INTENDED FOR USE IN ATTICS OR SIMILAR
LOCATIONS SUBJECT TO TEMPERATURES IN
EXCESS OF 150°F.
Contents
Package Contents ......................................................3
Before Getting Started ..................................................3
Find the Strongest Signal ................................................3
Installation Details ......................................................4
Quick Install ...........................................................5
Outside Antenna Installation .............................................5
Signal Booster Installation ...............................................6
Inside Antenna Installation ...............................................6
Powering Up the Signal Booster ..........................................6
Troubleshooting & Understanding Lights ...................................7
Additional FAQ .........................................................8
Safety Guidelines & Recommendations ...................................10
Signal Booster Specifications ...........................................11
Guarantee and Warranty ........................................ Back Cover
Installation Instructions for the Following Wilson Electronics Signal Booster:
DB Pro™ Adjustable Gain 800/1900 MHz In-Building Wireless
Smart Technology ™ Signal Booster
Model # 460005 FCC ID: PWO460005
To Next Page
Loading...
Need help?
General
