EasyManuals Logo

Wilson Electronics weBoost DRIVE X User Manual

Wilson Electronics weBoost DRIVE X
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2
CELL SIGNAL BOOSTER DRIVE X OTR FLEET
______
Step 1: Select Mounting
Location
Depending on the type of truck, there may be built-in antenna
mounting points. If the vehicle does not have built-in mounting
points, the antenna includes a three-way mount that will work
on vehicles with mirror rails. The antenna will also work with
third party CB antenna mounts.
Select mounting location on vehicle. The antenna can be
mounted in any CB mount or antenna mounting point on the
vehicle. For best performance mount the antenna above the
metal cab (it does not need to be above cab wind deflector).
Typical Antenna
Mounting Points
NOTE: Mount at least 12 inches from any other antennas. Free of obstructions.
NOTE: If the vehicle is using two CB antennas co-phase wiring, removing one
antenna will cause reduced performance of the remaining CB antenna.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wilson Electronics weBoost DRIVE X and is the answer not in the manual?

Wilson Electronics weBoost DRIVE X Specifications

General IconGeneral
BrandWilson Electronics
ModelweBoost DRIVE X
CategoryExtender
LanguageEnglish

Related product manuals