Wilson Electronics weBoost DRIVE X - Page 8

6
CELL SIGNAL BOOSTER DRIVE X OTR FLEET
______
(STEP 3 cont.)
Side Exit Adapter must
be used with Spring
Add thread lock on
all threads with tube
provided
Remove nut &
shakeproof washer
Mount disc washer with
lip in the DOWN position
Fasten nut with lip in
the UP position
Remove bolt &
plastic washer
If installing with the Spring, disassemble and reassemble the
3-Way Mount as shown below.
Disassemble
Resassemble
Spring
Side Exit
Adapter