14
HOME COMPLETE CELL PHONE SIGNAL BOOSTER
______
Light Patterns
Solid Green
This indicates that your booster is
functioning properly and there are no
issues with installation.
Blinking Green & Red
Band has reduced gain. This indicates
that one or more of the booster bands
has reduced gain due to a feedback
loop condition called oscillation. This is a built in safety feature to prevent harmful
interference with a nearby cell tower. If you are already experiencing the desired signal
boost, then no further adjustments are necessary. If you are not experiencing the desired
boost in coverage then refer to the Troubleshooting.
Solid Red
Band has shuto. This is due to a feedback loop condition called oscillation. This is a
built in safety feature that causes a band to shut o to prevent harmful interference with a
nearby cell tower. Refer to Troubleshooting.
Blinking Green & Yellow
Band has reduced gain. This is a built-in safety feature to prevent harmful interference
with a nearby cell tower. If you are already experiencing the desired signal boost, then
no further adjustments are necessary. If you are not experiencing the desired boost in
coverage, then refer to Troubleshooting.
Solid Yellow
Band has shutoff due to overload from nearby cell tower. Outside antenna must be
adjusted. Refer to Troubleshooting.
Light O
If the signal booster’s light is off, verify your power supply has power.
Band 2/25
Booster lights
Band 4 Band 5 Band 12/13/17
To Next Page
Loading...
Need help?
General
