© by WilTec Wildanger Technik GmbH Seite 6
http://www.WilTec.de
http://www.aoyue.eu Februar 2020 Version 2
http://www.teichtip.de
Description
CPF-180-250
Water inlet from the pump into the filter
Water flow from the filter into the pond
Clean water outlet from the filter to waste water or flower bed
Function position "Filter"
Function position "Clean"
CPF-2500-5000-10000-15000-20000-30000
Water inlet from the pump into the filter
Water flow from the filter into the pond
Clean water outlet from the filter to waste water or flower bed
The Wiltec pressure filter is an ideal filter system for your garden pond. The filter has more advantages
◊ high cleaning capacity
◊ combine mechanical and biological (Model dependent) filtering
◊ performant filter material
◊ Built-in UVC-unit and dirt indicator
◊ remains waterproof also by high pressure
◊ water delivery 3 m height (dependent on pump output which is connected)
◊ easy installation and maintenance of the filter
Function of the Wiltec Pond filters
The Wiltec pond filter purifies the water in 3 phases
1. The first stage is mechanic. The visible particles of dirt, from coarse to fine are removed by means of
a 3-layer filter foam
2. The second stage is biologic. With the help of the so-called bio balls (model dependent) the settling
of bio-organisms is stimulated. These bio-organisms remove the organic components from the pond
water. (Dependent on model)
3. The third stage comprises a UVC-water treatment. The UV-light destroys swimming algae and germs.
The result is healthy water.
To Next Page
Loading...
Need help?
General
