© by WilTec Wildanger Technik GmbH Seite 8
http://www.WilTec.de
http://www.aoyue.eu Februar 2020 Version 2
http://www.teichtip.de
Connection to the cleaning outlet:
To install a permanent drain hose to the cleaning connection (Clean), you have to unscrew/remove the
stepped tail to the cleaning connection (Clean), install the third stepped hose tail and connect a suitable
hose. In the filter operation the cleaning connection or a connected drain hose must be always closed
and sealed with a hose tail (closure cap) and gasket seal, as safety, in case the function switch is acci-
dentally set on „Clean“.
Attention! Do not operate the device without water flow or pump filter!
To Next Page
Loading...
