iOS Cast
Attention: Your device and the projector should be in the same Home
WiFi.
Setting with Home Wi-Fi
1.Turn on the WiFi Setting of projector.
2.Choose your Home WiFi to connect and enter the right password, then click
“Done”to Connect, please wait 3-5 seconds to establish the connection. Once
connected, it will remember the password of the connected WiFi.
3.Turn on the WiFi setting of your IOS mobile device, then connect it the same
Home WiFi as the projector.
4.Then click“IOS Cast” as the Input Source of your projector.
5.Swipe up the screen of your iOS mobile device and tap “Screen Mirroring” to
search for the projector, then select“WiMiUS-K1Projector”from the searching
results to connect.
6.Succeed.
How to Use WiFi Settings
Select the settings icon in the upper right corner of the main interface, and then
press the "OK" key on the remote control to enter the settings interface and
select "WiFi Setting".
For IOS System
support@wimius.com
EN
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
To Next Page
Loading...
