Focusing dial
Note: This projector support only Wireless Connection, wired connection is not
possible.
（3）Connect input devices and then choose signal source
button to choose corresponding signal source ( HDMI1, HDMI2,
AV,etc)
Connecting with Smartphones and iPad
P.S: The fluency of screen mirroring with wireless connection will be affected by
the network environment. A bandwidth of 100Mbit or more is recommended
when using screen mirroring. Make sure your mobile device is closed to the
projector when using wireless connection. A distance within 1 meter is recom-
mended.
Just operate through the remote control: Press “ ” and then press
" " or " ▲ ▼ " to choose the corresponding signal input channel,
then press "OK’’ to confirm.
support@wimius.com
EN
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
To Next Page
Loading...
