Miracast
To activate this function, your android device must support Multi-Screen/Wire-
less Display. Name of “Multi-Screen” may vary depending on various brands of
Android devices.
1.Turn on the projector, select “Miracast” as the Input Source.
2.Turn on the “Multi-Screen/Wireless Display” of your Android device.
3.Select “WiMiUS-K1Projector”from the searching results to connect.
4.Succeed.
For Android System
Method 1: Setting with mobile internet
support@wimius.com
EN
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
To Next Page
Loading...
