Wimius Q2 - FAQ

support01@wimius.com
EN
16
ABOUT US
About Function
About the machine The detail information of the device
Local upgrade Update via USB
Online upgrade Update Online
FAQ
1.No image on the screen.
a.Is the channel set-up correct?
b.Is there an input signal?
c.Is the input cable plugged well?
d.Under PC mode, is the refresh rate > 75KHz?
2.Blue screen no picture and no sound.
Input device doesn't connect well with the projector.
3.Picture right, no sound.
a.Please turn off the Dolby of the input device, and then it will have sound.
b.The decode system of the video is not supported by the projector.