Wimius Q2 - Image Adjustment; Focus Adjustment; Projection Mode; Keystone Correction

EN
5
support01@wimius.com
IMAGE ADJUSTMENT
1.Focus Adjustment
2.Projection Mode
Auto Keystone Correction
3.Keystone Correction
Slide pinion on the left of the device to adjust sharpness.
Select [Settings ] menu -- Select [ Projection] -- Select [Projection Mode],
Press the arrow key to select and press “OK” to confirm the projection
position.
There have 4 modes: Rotate Rear Ceiling / Rear / Front / Rotate Ceiling.
Select [Settings] menu -- Select [Projection] -- Select [Keystone
Correction]--Select [Auto Keystone Correction], and press “OK” to
conrm.
the projector can auto adjust the vertical plane to get the rectangle
image. The tilted angle doesn’t exceed ±30°.