Windsor Cadet 7 CDT7I - Filling the Solution Tank

17
Operations
Filling the Solution Tank
NOTE: Use clean bucket of water to fill solution tank.
Do not put defoamer, solvents, spotter or pre-spray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry spillage from top of solution tank before replacing
recovery tank.
* Product Trademark Names
Suitable Chemicals Non-Compatible Chemicals
Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
8-640-407-0 Manual, Operators CDT7I - 230V