Windsor Cadet 7 CDT7I User Manual

19
Operations
5. Replace the Recovery Tank on the machine.
Machine Operation
1. Plug cord into grounded outlet.
NOTE: Be sure dome is seated on recovery tank, and
float shut-off is installed correctly.
2. Adjust brush to proper setting.
NOTE: For good operation the brush must skim the
carpet. If circuit breaker trips, raise brush to prevent
damage to motor or carpet.
3. Turn on pump and vacuum motor switches
("ON"="I").
8-640-407-0 Manual, Operators CDT7I - 230V

Windsor Cadet 7 CDT7I Specifications

General

Brand	Windsor
Model	Cadet 7 CDT7I
Category	Floor Machine
Language	English