15
Operations
Cleaning Route
Accessory port
Cord Hooks
How It Operates
This machine is a portable, easy to use wide area
vacuum designed for use indoors, in a commercial or
light industrial environment.
When operating as a carpet vacuum, soil is lifted from
the carpet surface by two counter-rotating brushes
and carried into a removable bag by the vacuum
motors.
1. Large debris such as paper cups, plates, string,
etc., should be picked up before starting the
cleaning process.
2. Plan your cleaning route to work away from the
electrical source. Move machine forward at a
steady pace.
Cleaning
1. Adjust handle to comfortable position at waist
level or higher.
2. Use your finger to depress the Vacuum switch on
the control panel to activate the vacuum.
3. When using optional accessory tool, brushes will
be deactivated when accessory port is lifted.
Keep machine moving while brush engaged. Damage
to carpet could occur if not moving.
Gardez la machine en mouvement lorsque la brosse
est engagée. Sinon, des dommages peuvent se
produire au tapis.
4. Move forward or backwards at a steady pace for
thorough cleaning. Run machine more slowly
over extremely soiled areas.
5. Use the right side of the machine for edge
cleaning.
6. To keep the vacuum operating at maximum effi-
ciency, check the filter bag regularly. Use the
upper and lower access holes in basket to feel
level of fullness. Empty when 1/2 to 3/4 full.
7. 7.When finished vacuuming, coil the cord by
wrapping around the three cord hooks provided
on the handle tubes and control panel. The upper
hook pivots for easy release of the cord.
PIVOT
HOOK
To Next Page
Loading...
Need help?
General
