Web Operation
Note: To access the Winegard ConnecT software Winegard recommends
web browsers Microsoft Edge, Firefox, Safari, and Google Chrome.
Warning: For first time users - On the initial setup, your Gateway may have
to reconfigure the modem. If this occurs, expect an additional 1-2 minutes of
delay before the Gateway can be used.
DO NOT CLICK THE BACK BUTTON on your web browser when navigating
through this software.
Step 1 - Turn the Gateway power switch
ON. Turn on the WiFi enabled device(s)
that you want to connect and scan for
wireless networks. It may take a few
minutes for the Winegard network to
appear.
Step 2 -The label located on the front of
this manual lists the unique default SSID
and password. Select this WiFi network
from the list and enter the correct
password.
Note: It is recommended to set your
device(s) to automatically reconnect
with the Winegard Gateway
8
admin
Step 3 - Once connected, open your
device’s Internet browser and type
10.11.12.1 into the address bar and press
Enter. This will take you to the Admin
Login page. Login using the following:
USERNAME: admin
PASSWORD: admin
To Next Page
Loading...
Need help?
General
