17
MUST PERFORM!
READ BEFORE PROCEEDING WITH SYSTEM
INSTALLATION OR OPERATION
RECEIVER & POSITIONER
When plugged in, the receiver & positioner are ON. When connecting or
disconnecting any cables to receiver, positioner, or antenna, be sure to
unplug from power source.
Do not install the receiver and/or positioner where there is no ventilation. The
receiver/positioner must have adequate ventilation. Excessive heat can
cause premature failure of components.
WINEGARD SERVICE DEPARTMENT (800) 788-4417
MONDAY THRU FRIDAY, 7:00 - 3:00 PM CENTRAL TIME
Rev 4/98
To Next Page
Loading...
