To Next PageTo Next Page
Need help?Do you have a question about the WINEMASTER WineC25 and is the answer not in the manual?
Details key technical parameters like weight, dimensions, temperature settings, and power requirements.
Visual representation of the unit's dimensions and components for installation planning.
Specifies ventilation needs and environmental conditions for the unit's hot air expulsion.
Details the importance and methods for insulating the wine cellar for optimal performance.
Provides specific insulation thickness recommendations based on cellar volume and material type.
Covers insulation strategies for the cellar door and other heat-generating elements.
Instructions for cutting the wall and preparing the wooden frame for unit installation.
Guidance on ensuring the wooden frame is flush, level, and properly sealed.
Steps for removing the cover and mounting the air conditioner into the prepared frame.
Instructions for connecting the condensate drain pipe to ensure proper water evacuation.
Important pre-operation steps, including a 24-hour wait and initial power-on behavior.
Step-by-step guide on using the thermostat controls to adjust the cellar temperature.
Explanation of the main display indicators for different operating modes and statuses.
Information on engaging standby mode and how automatic defrost cycles function.
Recommends checking the filter every 3 months and provides instructions for replacement.
Outlines the legal warranty and the additional 2-year contractual warranty.
Details the requirements for warranty validity and common reasons for refusal.
General| Type | Freestanding |
|---|---|
| Capacity | 25 bottles |
| Cooling System | Thermoelectric |
| Dimensions | 450 x 400 x 740 mm |
| Temperature Zones | Single Zone |
| Door Material | Glass |
| Noise Level | 39 dB |
| Temperature Range | 5-18°C |
