VERSION 2.1 06.2020
USER GUIDE WINE C25 / C25S(R)/WINEC25X/WINEC25S(R)X
Page 6
VENTILATED COLD OR « NO FROST »
The advantages of « ventilated cold »:
- No frost other than on the evaporator.
- Automatic defrosting and maximized refrigeration efficiency.
- Cold distribution improved by a permanent air circulation (without air stratification).
- The circulation of air allows maintaining the pre-selected temperature throughout the cel-
lar.
1.2. Cellar insulation
Insulation is essential for efficient functioning of the WINEMASTER
®
. A good insulation enables to main-
tain a stable temperature and humidity level. The chart on the next page will allow you to determine
the type and thickness of insulation needed in relation to the exterior volume of the cellar and model of the
WINEMASTER
®
, for an inside temperature of 12°C.
Complete insulation
The insulating elements should be preferably :
- By « tongue and groove » panels or
- By panels fused together
→ IMPORTANT: Avoid the intrusion of heat and humidity which can alter the functioning.
To Next Page
Loading...
