How to fix WingScapes BirdCam Digital Camera that takes too few photos in AUTO mode?
If your WingScapes Digital Camera is capturing too few photos or videos in AUTO mode, ensure the camera is correctly aimed and nothing obstructs the infrared sensor. You may also need to decrease the DELAY setting, increase the #PHOTOS/EVENT setting, increase the SENSITIVITY setting, or decrease the distance between the camera and your target.
What to do if WingScapes Digital Camera takes too many empty pictures?
If your WingScapes Digital Camera is taking an unusually high number of empty images (without birds) in AUTO mode, it may be due to birds flying past without landing or movement of the feeder. Try decreasing the SENSITIVITY and #PHOTOS/EVENT settings. Also, position the camera to minimize open area behind the target, such as aiming at a feeder against a wall.
Why WingScapes BirdCam takes too many photos in AUTO mode?
If your WingScapes Digital Camera is capturing too many photos or videos in AUTO mode, try decreasing the #PHOTOS/EVENT setting, increasing the DELAY setting, or decreasing the SENSITIVITY setting.
Why WingScapes Digital Camera photos or videos are too dark?
The image quality of the WingScapes Digital Camera depends on variables such as the source and intensity of light. If your images are poorly exposed in all conditions, please contact customer support.
General| Brand | WingScapes |
|---|---|
| Model | BirdCam |
| Category | Digital Camera |
| Language | English |
Explains the immediate outcome after starting the BirdCam.
Lists all items included with the BirdCam package.
Detailed technical specifications of the BirdCam.
Key factors for optimal placement, stability, and obstruction avoidance.
How to use the laser aiming device for accurate positioning.
Instructions on how to access the MODE menu.
Adjusting delay, photos per event, sensitivity, and resolution.
Common issues and their suggested solutions for the BirdCam.
Procedures for diagnostic tests and explanation of error codes.
To Next Page
