Winix ZERO Pro User Manual


English ZERO Pro
CONTROLS
Air Outlet Vent
Light Sensor
Detects the amount of
ambient light within
the environment, to
adjust the brightness
of the LED indicators.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium, High, Turbo)
Timer Indicator
If timer has been set,
the LED light Indicates
the set time of operation.
PlasmaWave Indicator
Indicates whether
PlasmaWave is
enabled or disabled.
Timer / Air Quality Button
Press to cycle through and set
desired length of operation
(1hr, 4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds to
enable or disable the Air Quality
light.
Smart Sensor
Automatically
detects indoor air
quality.
Child Lock Button
Press and hold for 3 seconds
to enable or disable the Child
Lock mode. LED light indicates
whether Child Lock mode is
enabled or disabled.
Reset Button
After replacing a lter,
press the RESET button
for at least 5 seconds.
Power Button
Turns the unit on
or o.
Check Filter
Indicator
LED light indicates
when it is time to
change the lter.
PlasmaWave Button
Enables or disables
PlasmaWave .

Winix ZERO Pro Specifications

General

Timer	Yes
Efficiency	99.97 %
Noise level	55 dB
Filter color	Gold
Certification	CE, WEEE, RoHS
Compatibility	Winix ZERO PROWINIX ZERO+, HR950, HR1000
Product color	Blue, Orange
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Power consumption (max)	90 W
Sustainability certificates	ENERGY STAR
Built-in display	No
Package type	Box
Number of products included	1 pc(s)

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g