SECTION 9
CARE & MAINTENANCE
9-8
• The 3000-mile oil life counter on the engine
controller will be reset to start a new cycle.
ENGINE ACCESS - Ford or Work-
horse Chassis
HOOD
The hood latches are located behind the bot-
tom edge of the hood panel near both ends of the
grille. Squeeze or pull both latch handles at the
same time toward the hood panel to release the
latches. Then pull the hood panel outward slight-
ly and lower it into the open position. Do not let
the hood drop.
To close the hood, lift and swing inward. Press
bottom edge of hood panel inward firmly with
palms of your hands to ensure proper latching.
With the hood open, the engine oil dipstick,
oil fill, radiator fill, power steering reservoir and
windshield washer reservoir are accessible.
ENGINE COVER (Ford or Workhorse
Chassis)
· Insert the supplied hex wrench into the hole
in the rear top or edge of the engine cover.
Squeeze latch handles toward hood panel and
lower hood down into open position.
Engine Coolant
Reservoir
Engine Oil
Fill
Transmission
Fluid Dipstick
Windshield Washer
Fluid Reservoir
Engine Oil
Dipstick
Power Steering
Fluid Reservoir
Brake Fluid
Reservoir
Unlatch
To Next Page
Loading...
Need help?
General
