SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be fol-
lowed during installation and maintenance of the generator and
batteries.
Read and understand all instructions in the manual before starting
and operating the generator set.
USING THIS MANUAL
Congratulations on your choice of a WINPOWER generator set.
You have selected a high-quality, precision-engineered generator
set designed and tested to give you years of satisfactory standby
service.
To get the best performance from your new engine generator set,
it is important that you carefully read and follow the operating
instructions in this manual.
Should you experience a problem please follow the “Things To
Check” near the end of this manual. The warranty listed in this
manual describes what you can expect from WINPOWER should
you need service assistance in the future.
COPY YOUR MODEL AND SERIAL NUMBER HERE
No other WINPOWER generator has the same serial number as
yours. It is important that you record the number and other vital
information here. If you should ever need to contact us on this unit
it will help us to respond to your needs faster.
MODEL________________________________
SERIAL NUMBER________________________
‘M” Spec. ______________________________
PURCHASE DATE_______________________
DEALER_______________________________
TABLE OF CONTENTS
INTRODUCTION i
GUIDE TO PRODUCT SAFETY 1
BASIC INFORMATION 2
Specication Table 2
Description 3
RECEIVING THE GENERATOR 3
Unpacking the unit 3
ENGINE GENERATOR INSTALLATION
Installation 4
Engine Generator Set Mounting 5
Fuel Installation 5
Lubrication 6
Coolant 6
Battery Installation 6
Control Panel Wiring Diagram 8
AC Electrical Connection 9
Key Start Panel Layout 10
Manual Key Strt Up 10
DSE3110 Elcectronic Control 11
DSE3110 Start UP 13
DSE3110 Fault Codes 15
TROUBLESHOOTING INFORMATION 16
DC SCHEMATIC - WIRING DIAGRAM
MANUAL KEY START
DE20I4 & DE30I4 17
DE45I4 & DE65I4 18
DC SCHEMATIC - WIRING DIAGRAM DSE3110
DE20I4 & DE30I4 DSE 702 19
DE45I4 & DE65I4 DSE 702 20
AC WIRING - THREE PHASE
277/480 Volt 21
120/208 Volt 21
120/240 Volt 22
AC WIRING - SINGLE PHASE
120/240 Volt 22
GENERATOR TESTING RESISTANCES &
ENGINE REPLACEMNT PARTS. 23
REMOTE START WIRING 25
12 MONTH WARRANTY 26
PROPER USE AND INSTALLATION
You must be sure your new engine generator set is:
* Properly serviced before starting
* Operated in a well ventilated area
* Properly exhausted and gases safely dispersed
* Wired by a qualied electrician
* Operated only for its designed purposes
* Used only by operators who understand its operation
* Properly maintained
To Next Page
Loading...