Machine description | 3 | English
Operating instructions PT Series | 89014547; 2021-03 | 11
Automatic hood start
Closing the hood automatically starts a washing programme. The automatic hood start can be deactivated by an author-
ised service technician (P572). Every washing programme will then need to be started by pressing the start button.
Automatic hood mechanism (optional for PT-M and PT-L)
The hood opens automatically after every washing programme and can be closed again using the start button on the front
cover.
EnergyPlus (optional)
Note:Cold water connection required.
The Energy module above the warewasher includes a fan motor and a heat exchanger. The fan motor extracts the moist,
warm air (=vapours) out of the washing compartment and transfers the generated energy to the cold inlet water via a
heat exchanger. A waste water heat exchanger provides an additional energy gain.
ClimatePlus (optional for PT-M and PT-L)
Note:Cold water connection required.
The heat pump module above the warewasher includes a fan motor and a heat pump. The fan motor extracts the moist,
warm air (=vapours) out of the washing compartment and the area around the warewasher and transfers the generated
energy to the cold inlet water via a heat exchanger.
Cool (optional)
Note:Cold water connection required.
The rinse temperature can be changed for warewashers with this option. Glasses are ready to be used again faster with
cold rinsing.
Integral water softener (optional)
Warewasher with built-in salt container for regeneration salt. The regeneration salt softens the inlet water and thus pre-
vents a build-up of limescale inside the warewasher and on the items being washed.
PAY PER WASH (optional)
Further information is available on our homepage.
www.pay-per-wash.com
CONNECTED WASH
Further information is available on our homepage.
www.connected-wash.com
To Next Page
Loading...
