English | 4 | Software
20 | 89014547; 2021-03 | Operating instructions PT Series
Exit the menu
4.1.4 Timer
The timer can be used to programme the warewasher to switch on or off automatically at a specific time.
At the time of automatic start-up the following requirements must be met:
– The hood is closed.
– The on-site mains voltage is switched on.
– The on-site water supply is open.
Item Name
1 Set a regular time
2 Set a non-recurring date
Set a regular time
Item Name
1 Switch the timer off / on
2 Time for automatic switch-off
3 Time for automatic start-up
4 Select time schedule
– Daily
– Mon-Fri, Sat-Sun
– Individual (a different time on every weekday)
To Next Page
Loading...
