English | 6 | Operation
36 | 89014547; 2021-03 | Operating instructions PT Series
Start washing programme
Ø Sort wash rack correctly.
Ø Open the hood.
Ø Slide the wash rack into the warewasher.
Warewasher without an automatic hood mechanism:
Ø Close the hood.
ð Washing programme starts automatically.
ð Start button lights up blue.
Warewashers with an automatic hood mechanism:
Ø Press the start button on the front cover or hood.
ð Start button flashes blue.
ð The hood closes and the washing programme starts automatically.
ð Start button lights up blue.
End of the programme
Warewasher without Energy module, heat pump module or automatic hood:
Ø Washing programme ends automatically.
ð As soon as the washing programme ends, the start button flashes green.
Warewashers with an automatic hood mechanism:
Ø Washing programme ends automatically.
ð The hood opens.
ð The start button lights up green.
Warewasher with Energy module, heat pump module without automatic hood:
Ø Washing programme ends automatically.
ð The start button will begin to flash blue-green before the end of the programme. At the same time, the warm and
humid vapour is extracted from the interior, and the heat energy stored in it is recovered for the next washing pro-
gramme.
ð The hood only opens after the start button begins to flash green and the warm and humid air has been extracted.
Warewasher with Energy module, heat pump module and automatic hood:
Ø Washing programme ends automatically.
ð The start button will begin to flash blue-green before the end of the programme. At the same time, the warm and
humid vapour is extracted from the interior, and the heat energy stored in it is recovered for the next washing pro-
gramme.
ð The hood opens automatically, the start button lights up green.
To Next Page
Loading...
