TSW200E1
• 01 (one) RS232/G.703 converter
• 01 (one) user manual
• 01 (one) transport valise
• 01 (one) switching power supply
1.3 - TSW200E1 Specifications
The TSW200E1 has many working modules, which are split in many modes. The equipment
specifications are:
• 192x128 pixels graphic display
• 23 key alphanumeric keypad with function keys
• Full-duplex communications mode
• Synchronous and asynchronous transmission
• Operating speeds:
Asynchronous mode: 50, 75, 110, 150, 300, 600, 1200, 1800, 2400, 3600, 4800,
7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200 bps
Synchronous mode: 1200, 2400, 4800, 7200, 9600, 14400, 19200, 24000, 28800,
38400, 48000, 57600, 64000 bps up to 10Mbps.
External clock: up to 2048 Kbps
Recovered / regenerated clock: for co-directional G.703 and 2 Mbps G.703.
• Interfaces: V.24/RS 232, V.35/V.11, V.36/V.11, X.21/V.11, co-directional G.703, 2048 Kbps
G.703.
• Bits per character: up to 8
• Parity: odd, even, none, mark, space
• Stop bits: 1, 1.5 or 2
• Operating modes:
BERT/BLERT module – SYNCHRONOUS and ASYNCHRONOUS
E1/G704 module – TX/RX FRAMED, THROUGH FRAMED, MUX, DEMUX,
MONITOR, FREQUENCY/LEVEL, ROUNDTRIP DELAY
Dual E1 module
Pulse Mask module
FR.RELAY module – TURN UP, PING, FOX
X.25/xDLC module – SDLC/HDLC/X.25/ASYNC/SYNC/DDCMP
PPP module
HDLC CISCO module
X.50 module frame
CAS MFC-R2 module
DTMF module
ISDN module
VT100 module
• Frequency measuring: from 0 to 2048000 Hz
• PCM frame structure: PCM30, PCM30C, PCM31, PCM31C
• Line codes: HDB3 and AMI
• Data printing: serial and parallel
interface: cable supplied
speeds: 1200 to 115200 bps
line parameters: 8 bits per character, 1 stop bit, no parity
Wise Telecommunications Industry 2
To Next Page
