TSW200E1
It is valid only for pseudo-aleatory sequences.
• SLIP/HOUR: indicates the proportion of SLIPS per hour (following Recommendation
G.822).
• SLIP/DAY: indicates the proportion of SLIPS per day (following Recommendation
G.822).
From that screen, it is possible to:
a. Press <F1> (BACK) to go back to the first error screen
b. Press <F2> (MENU) to go to the menu screen
c. Press <F4>(NEXT) to go to the fourth error screen
The basic errors fourth screen is only showed if the selected inteface is G703-2M. It is the
following:
• CODE ERROR: indicates the total number of code errors (HDB3 or AMI line codes)
that occur while the test is running.
• CODE E. R.: exponential notation rate between the number of code errors and the total
number of received bits.
From that screen, it is possible to:
a. Press <F1> (BACK) to go back to the first error screen
b. Press <F2> (MENU) to go to the menu screen
4.4.2 - The Recommendation G.821 Error Analysis
The Recommendation G.821 counters screen is displayed in the figure below:
Wise Telecommunications Industry 29
To Next Page
Loading...