Wise TSW200E1 - Alarms

TSW200E1
• AVAILAB.SEC.: indicates the quantity of available seconds during the test.
• UNAVAIL.SEC.: indicates the quantity of unavailable seconds during the test.
F1 F2 F3 F4
BACK ITU-T SCROLL
M . 2 1 0 0
TEST PERIOD = 7 DAYS
COMPLETED PERIODS = 0000
PERIOD: RESULT:
01/08 ------------
• TEST PERIOD: repeats the test duration chosen in the setup.
• COMPLETED PRD: total test periods already completed by the Test Set.
• RESULT: indicates if the test duration that was running was accepted, rejected or if it is
uncertain to decide. When the test is uncertain, that means that it is impossible to come
to conclusions about that particular period of test and thus the test must be rerun.
• PERIOD: indicates the period to which the result refers. To visualise other periods use
<F4> (SCROLL).
5.2.3 - Alarms
The TSW200E1 displays screens with an array of alarm counters. To navigate through them
press <F1> (BACK) and <F4> (NEXT). To go back to the Menu screen press <F2> (MENU).
F1 F2 F3 F4
MENU NEXT
A L A R M S
SIG NAL LO SS =
AIS =
NO SYNC =
SYNC LOSS =
FAS LOSS =
CAS LOSS =
00000
00000
00000
00000
00000
00000
00000
• SIGNAL LOSS: indicates the total number of absences of the 2M stream when the test is
running.
• AIS: indicates the total number of occurrences of alarm signalling when the test is
running.
• NO SYNC: Indicates the number of seconds during which the equipment has lost sync.
Wise Telecommunications Industry 44