TSW200E1
(see next section for a description of error and alarm counters).
From the first OK screen it is possible to go to one the following screens pressing:
• <F1> (ERRTYPE) takes to the error insert type selection screen shown below
• <F3> (MENU) takes to the menu screen
• <F4> (AUDIO) turns on or off the audio coming from the received data
In this screen it is possible to select the type of error inserted when the <ERROR> key is
pressed. To select the kind of error, move the cursor to the appropriate line and then press <F3>
(ENTER).
If any error or alarm occurs, the equipment automatically changes from the OK screen to the
corresponding error or alarm screen. The OK screen becomes unavailable.
From the menu screen, the other result screens can be reached by using the cursor and the
Wise Telecommunications Industry 36
To Next Page
Loading...