10 11
Using Your Wisewell
WATER TEMPERATURE OPTIONS
On the touch control panel, select from the following temperatures using the ‘right’ and
‘le’ arrows.
1. Hot water (Red LED)
When the ‘Hot Water’ selection is highlighted, the child lock is ON by default.
Press and hold the ‘Dispense’ button for 3 seconds to unlock it.
Hot water can now be dispensed by pressing the ‘Dispense’ button.
The child lock will automatically be reactivated aer 10 seconds.
2. Room temperature water (White LED)
Ready to dispense when the white LED is on.
3. Cold water (Blue LED)
Ready to dispense when the blue LED is on.
Fill up the tank and place it on your Wisewell. Wait about 15 minutes for the internal
reservoir to fill up with water before attempting to dispense.
Disposing Of The Residual Water
ATTENTION: Always dispose of the residual water
The reverse osmosis (RO) system works by flushing used water back into the tank. When the
front LEDs start to pulse or the ‘Change Water’ icon appears on the touch control panel, it
means it is time to dispose of the residual water (usually around 1L) and refill the water tank.
Before refilling your water tank with fresh tap water, be sure to empty the tank of all residual
water. DO NOT add water to the residual water in the tank. This will result in a sub-optimal
purification process.
FUN FACT: Because the residual water sits in the tank, your Wisewell is able to reuse part of the
residual water for purification purposes, making this system extremely eicient: on average,
for every 4L of fresh water produced, only 1L has to be discarded. (Other RO systems oen
produce MORE residual water than drinkable water).
Place your receptacle below the water spout. When you tap the ‘Dispense’ button, your
Wisewell will dispense one serving of water. To stop the flow of water at any time, tap
‘Dispense’ again. Do not place any objects over 4lbs (2kg) on the water tray. Note that the
top portion of the tray can be removed for easy cleaning.
Repeat
Repeat steps 2 and 3 two more times. If the new
filters’ flavor persists, keep draining your Wisewell
from the back until optimal taste is reached (see
page 17).
Drain Your Wisewell
Remove the water tank and position it under the
spout at the back of the wisewell. Remove the
drain cover and rubber plug from the drainage
holeand dispose of the water in the tank.
Two
To Next Page
Loading...