EasyManua.ls Logo

WisyCom MPR52-ENG - Technical Data and Specifications; Frequency Ranges and Channels; Performance Specifications; Sensitivity and Selectivity

WisyCom MPR52-ENG
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MPR52-ENG User Manual
9
TECHNICAL
DATA
Frequency ranges : 470 ÷ 800 MHz and 960 ÷ 1160 MHz (DME)
MPR52 B1
option 940 ÷ 960 MHz
MPR52 B2
option 1240 ÷ 1260 MHz
MPR52 B3
option 806 ÷ 810 MHz
Switchable channels : 2400 user programmable frequencies, organized in 40 groups of 60 channels.
Switching-window : up 790 MHz.
Frequencies : microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with the optional UPKmini
Programming Kit or micro-USB
Frequency error : < ± 2.5 ppm, in the rated temperature range.
Temperature range : -10 ÷ +50 °C.
Modulation : FM mono, wideband or narrowband IFB (SW selectable)
Max deviation : ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input imp. : 50 ohm sma type (SWR < 1:2; typ. 1:1.4).
Sensitivity :
2 µV ( 6 dBµV), for SND/N > 58 dB;
5 µV (14 dBµV), for SND/N > 98 dB.
in the whole switching-window [1].
Amplitude response : < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV).
Adjacent chan. Sel. : > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions : < 2 nW (typical = 0.1 pW).
Noise Reduction : ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572,
SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth : 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband)
Frequency response : ± 0.5 dB in the 30 Hz ÷ 19 kHz range (wideband),
: ± 0.5 dB in the 30 Hz ÷ 13 kHz (narrowband)
Distortion : 0.3 % typical.
SND/D ratio (Anal.) : 100 dB typical [1]
SND/D ratio (AES3) : > 125 dB typical
Powering : - 2 x IEC-LR6 1.5V size-AA alkaline or NiMh rechargeable
- C3-V3 battery pack
- KLIC 8000 or CR-V3R lithium (i.e. DR9708 duracell)
Battery life : approx. 5 hours with MPRLBP Lithium-ion battery pack CS-KLIC8000 type (double
receiver configuration)
approx. 7 hours with MPRLBP Lithium-ion battery pack CS-KLIC8000 type (single receiver
configuration)
Weight : 100 g approx. without batteries

Related product manuals