BWT901CL | manual v0707 | http://wiki.wit-motion.com/english
Step 4. Click “Complete Calibration”
Step 5. Judge the result--confirm if there is 1g on Z-axis acceleration
1. After1 ~ 2 seconds, the three axial acceleration value of the module is
about 0, 0，1, the X and Y axis Angle is around 0°. After calibration, the x-y
axis Angle is accurate.
Note: When putting the module horizontal, there is 1g of gravitational
acceleration on the Z-axis.
To Next Page
Loading...
