To Next Page

To Previous Page

WT901BLECL BLE5.0 | manual v23-0420 | www.wit-motion.com

- 42 -

Bandwidth as 256Hz, Output rate as 50Hz. The waveform will show more

fluctuation.

2. The higher rate of bandwidth will solve the data-repeating problem.

For example, if the bandwidth setting is 20Hz, retrieval rate as 50Hz, there will

be 5 repeating data.

If you prefer there is no repeating data, it is required to increase the bandwidth

more than 50Hz.

Questions and Answers:

Need help?

Do you have a question about the WiT WT901BLECL BLE5.0 and is the answer not in the manual?

WiT WT901BLECL BLE5.0 Specifications

General