2. Observe the values shown on the display.
3. Only if you continue to see the wrong values: Take the batteries out of all the wireless sensors in use and
put them back in.
Troubleshooting
Outdoor temperature
is showing dashes
Replace battery
Dashes is generally an indication of wireless interference.
a. Turn off the main weather station (take out batteries or unplug the
power cord)
b. Take the batteries out of the outdoor sensor
c. Turn on the main weather station (put batteries in or plug the power
cord)
d. Put batteries back in the outdoor sensor
e. Let the units sit within a couple feet of each other for about 20
minutes to gain a strong connection.
Display screen not working
Check that the power adapter is plugged into the display and an
electrical outlet.
Accuracy of temperature and
humidity
1. When unpacking for the first time, the weather station and sensor are
sealed for a long time, and it takes 1-2 hours to balance with the current
ambient temperature.
2. Keep away from heat
3. When comparing with other thermometers, it should be placed in the
same position and allowed to stand for 1-2 hours. This is very important.
Inaccurate temperature or
humidity
To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
Cleaning
1. When operating using the power mains: Remove the switching adapter plug from the base unit.
2. Wipe the base unit with a slightly damp cloth when required.
3. Dry off the device completely before connecting it with the switching adapter again.
Technical Data
Base unit
Model: WT2076B
Power consumption: 5.0V 600 mA
Power supply: 3 x LR03 (AAA) / 1.5 V
Temperature measuring range: 14.2°F ~ 122°F
Temperature measuring accuracy: +/-0.5
°
F
Humidity measuring range: 1 % to 99 % relative humidity
To Next Page
Loading...
