Deactivate/Activate alarm
The alarm clock is off by default and needs to be activated manually.
• press ALARM once: on the display, alarm is activated.
• press ALARM twice: disappear, alarm is deactivated.
Stopping the alarm
You will be woken by the alarm at the set time, and the sound will become more and more intense as the
alarm continues.
• Snooze - Press the SNOOZE•LIGHT button to stop the alarm for approx. 5 minutes.
• Switch off the alarm completely - Press any button on the base unit (apart from SNOOZE•LIGHT), to stop
the alarm. The alarm will go off again after 24 hours.
• Automatic stop function- If you do not press any buttons, the alarm will automatically switch off after 2
minutes. The alarm will go off again after 24 hours.
Snooze function
Press the SNOOZE•LIGHT button once when the alarm sounds.
The alarm signal is paused for approx. 5 minutes, and the symbol will flash on the display. Afterwards,
the alarm will sound and wake you up again. You can repeat this process multiple times.
Weather information
Temperature and humidity
This area of the display is divided into two parts. The left part shows the data measured by the wireless
sensor; the right part shows the information gathered by the base unit.
Information:
If “LL.L” is displayed for the indoor temperature, the measuring range of inside temperature is below -14.2°F.
If “HH.H” is displayed for the indoor temperature, the measuring range of inside temperature is above
+122°F.
If “LL.L” is displayed for the outdoor temperature, the measuring range of outside temperature is below
- 40°F.
If “HH.H” is displayed for the indoor temperature, the measuring range of outside temperature is above
+158°F.
To Next Page
Loading...
