Software installation
First,Install Mach3 software to your PC.
- 7 -
ChengDu XinHeCheng Technology Co.,Ltd
Second, copy our driver into mach3.Check file in the CDreadme
Check our wiring for ref er ence, connec t our car d to your machi ne cor rect ly
Connect your PC to our card by using network cable
After these steps, you can open your Mach3 software for operating
Please take a look at mach3 software parame ters setting,Step per and
so on in the printed ma nual of our packing box for reference.
To Next Page
Loading...
