WMF Presto Service Manual

10
WMF presto Service manual edition 08/2007
WMF presto Service Manual
3.8 submenu standards
factoryservice/customer
After tapping “self-detect” is first run automatically. All
components operating on 24 V or 30 V are automatically
addressed. The components are automatically identified.
During self-detect the grounds container must be in
place, the adjustable screen closed or the 24/30 V circuits
of the components are interrupted.
Factoryservice/customer menu 1
Configuration of grinders
Configuration of powder portioner
Steam boiler existent
Configuration of grinders is registered automatically (see
chapter portioner).
Configuration of powder portioner is registered
automatically (see chapter portioner).
Steam boiler is registered automatically by its intake valve
(See chapter boiler
water system).
Factoryservice/customer menu 2
Steam dispensing valve existent
Fresh milk valve (cappuccino valve) existent
Aquaflex
Steam dispensing valve is automatically detected
(See chapter boiler water system)
Milk is automatically detected
(See chapter boiler water system)
Aquaflex The machine can be operated as fresh water or
water tank version by the customer. This option can only
be set if water tank was detected as “no”.
See chapter engineering, portioner
in the training manual
See chapter engineering,
boiler/steam boiler
in the training manual
Part 2 Engineering
See chapter engineering, portioner
in the training manual
See chapter engineering,
boiler/steam boiler
in the training manual
Part 2 Engineering
See chapter Boiler water systems
in the training manual
Part 2 Engineering
See chapter Boiler water systems
in the training manual
Part 2 Engineering

WMF Presto Specifications

General

Brand	WMF
Model	Presto
Category	Coffee Maker
Language	English