4
WMF presto Service manual edition 08/2007
WMF presto Service Manual
1 Customer setup
Condition
Machine is reset to customer setup
Display-guided setup according to brief instructions.
Check correct setting of water hardness or descaling
filter and range of descaling filter.
If necessary update software to latest version (laptop
program KonfigTool required)
Adjust boiler temperature and beverages according to
customer specifications
(Customer Settings
recipes/buttons, service program
beverage data or KonfigTool beverage data)
Enter service point (KonfigTool required)
Store data in service memory (service program
machine data standards customerService)
Backup machine data in laptop memory
After setup, the service technician must note the
following statement in the assembly invoice:
“At the end of operation, had to be turned off at source.
The user manual and accessories were given to the
customer.”
The customer must acknowledge this by his signature.
Reset automatic customer setup.
See general information
in the training manual
Part 5 Service
Reset automatic customer setup.
See general information
in the training manual
Part 5 Service
To Next Page
Loading...
Need help?
General
