821016: AMPx-E8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
19
Chapter 2 System Overview
Rear Panel Connectors
The pin-out for this connector is compatible with Tascam DB-25 to
XLR cable assemblies. Contact your Wohler sales representative for
availability. (Wohler’s contact information is on page ii of this
document.).
Figure 2–12 AES Balanced Out from SDI
DB-25 Pin-Out
• Selected Downmix/Analog Out (Left and Right, XLR-M): These
connectors are balanced analog outputs of the speaker assign (or
downmix) source as selected for the left and right speaker channels.
See the pin-out diagram in Figure 2–13 on page 19.
Figure 2–13 XLR-M Pin-Out
• AES Bal In/Loop Out (DB-25): This connector contains both inputs
and looped outputs. Refer to AES/PCM In (and Loop Out), page 16
for a full description.
To Next Page
Loading...
