Wöhler FA 430 - Displaying the Lowest and Highest Measured Values

Operating the fan anemometer
49
EN
5.7 Displaying the lowest and highest measured values
Fig. 8: Maximum value
 When in the normal Measuring mode, press
and hold the HOLD/MIN/MAX key for 3 sec-
onds.
The lowest measured values are displayed. MIN
is shown in the display.
 Press and hold the HOLD/MIN/MAX key again
for 3 seconds.
The highest measured values are displayed. MAX
is shown in the display.
 To return to the normal Measuring mode,
press and hold the HOLD/MIN/MAX key again
for 3 seconds.
 To toggle between the individual readings on
the display when in the MIN or MAX mode,
press the Up key (top part of the display) or
the Down key (lower part of the display).