Wöhler FA 430 - P4.0: Entering the Absolute Pressure (Wöhler FA 430 Only)

Settings
55
EN
6.4 P4.0: Entering the absolute pressure (Wöhler FA 430 only).
When measuring at high altitudes, take the pressure into consideration to obtain a pre-
cise CO
2
reading. Before beginning to take measurements at high altitudes, enter the
absolute pressure of your location .
 In the P4.0 mode, press the HOLD/MIN/MAX
key to access the Absolute pressure setting
mode.
The preset absolute pressure is displayed in hec-
topascal (1013 hPa).
Fig. 17: Entering the absolute pressure
 Using the Up and Down keys, set the absolute
pressure of the location where you are taking
measurements.
 To return to the P4.0 mode after completing
the setting, press the HOLD/MIN/MAX key.