EasyManua.ls Logo

Wolf ART User Manual

Wolf ART
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Installation
and
Operating instructions
ART
Analog room thermostat
with day program
for gas fired boilers
Nr. 8610015
Technology serving mankind
Part no. 30 48 400 Subject to technical modifications 6.6701.621
Wolf GmbH · Postfach 1380 · 84048 Mainburg · Tel. +49 8751/74-0 · Fax +49 8751/741600 · Internet: www.wolf-heiztechnik.de
03/06 TV GB
Question and Answer IconNeed help?

Do you have a question about the Wolf ART and is the answer not in the manual?

Wolf ART Specifications

General IconGeneral
BrandWolf
ModelART
CategoryThermostat
LanguageEnglish

Summary

Summary of Functions

Terminology and Standards

Terminology

Definitions of heating system terms like boiler, DHW, and heating programs.

Standards and Regulations

Compliance directives for gas fired combination boilers, including Low Voltage and EMC.

Installation and BUS Interface

Installation Guidelines

Instructions for mounting the ART on an internal wall, avoiding draughts and obstructions.

BUS Interface Configuration

Setting the ART for eBUS or SCOM interfaces using DIP switches for Wolf boilers.

Electrical Connection

Operation Modes and Display

Program Selector Functions

Overview of operating modes (Standby, Summer, Winter) and their impact on heating and DHW.

Temperature Selection

How to adjust the desired room temperature for heating mode using the rotary selector.

Status Display Indicators

Interpreting symbols and numbers on the display for heating mode, economy mode, and DHW status.

Time, Temperature, and Settings

Setting Time and Seasonal Changes

How to set the current time and switch between summer and winter time manually.

Setting Economy Temperature

Adjusting the desired room temperature for economy mode using the rotary selector.

Day Programs and DHW Boost

Day Program Configuration

Setting daily heating and DHW schedules using DIP switches under the front flap.

1 x DHW Function

Activating a single hot water heating cycle outside the programmed schedule.

Contractor Level Parameters

Display Parameters

Explanation of system displays like set flow temperature and actual flow temperature.

Parameter List

List of adjustable parameters (P03-GB15) for system configuration by qualified personnel.

Contractor Level - Functions and Faults

Automatic Changeover and Frost Protection

How the ART automatically switches between summer/winter modes and frost protection settings.

Fault Codes and Reset

Explanation of common fault codes (e.g., 91) and procedures for controller reset.

Specific Contractor Settings

Details on setting DHW temperature, pasteurisation, and loading factory configurations.

Accessories and Specifications

Optional Modules

Information on the radio clock module and telecontrol module for extended functionality.

Technical Specifications

Key technical data including supply voltage, power consumption, and environmental ratings (IP30).

Related product manuals