Need help?Do you have a question about the Wolf RM-2 and is the answer not in the manual?
General| Type | Room Thermostat |
|---|---|
| Compatibility | Heating systems |
| Protection Class | IP30 |
| Setpoint Range | +10 °C to +30 °C |
| Hysteresis | Approx. 0.5 K |
Details the intended use for RM-2/RM-2 Wireless modules and identifies the target audience.
Explains document symbols, warning types (DANGER, WARNING, CAUTION, NOTE), and their meanings.
Lists abbreviations and provides guidance on safekeeping and layout of warnings.
Defines proper application and warns against incorrect use, user liability, and operation by unqualified persons.
Covers safety precautions, electrical voltage risks, and frost protection requirements.
Provides recommendations for module placement and details the installation of the wall retainer.
Explains eBus connection for RM-2 and power options (batteries/supply unit) for RM-2 Wireless.
Details procedures for decommissioning, maintenance, and environmentally responsible disposal of modules and batteries.
Presents a visual overview of the touchpanel and explains the meaning of various display symbols.
Details the automatic initialisation process for the wired RM-2 upon connection to the electricity.
Covers pairing the RM-2 Wireless, handling pairing failures, and deleting connections.
Explains how the RM-2 determines its function (controller/remote) and how to change it.
Details how functions are assigned based on use and how to lock/unlock device controls.
Explains the reset procedure and energy saving modes, including proximity sensor activation.
Describes how fault messages and filter warnings are displayed and how to acknowledge them.
Covers adjusting setpoints and selecting various operating programs for heating/cooling.
Details accessing the menu, navigating display/parameter lists, and setting up holiday mode.
Explains how the RM-2 interacts with the heating control unit and its role in system control.
Covers navigating displays, setting room temperature, ventilation levels, and program selection.
Details accessing the menu, parameter configuration, and setting time programs for heating/DHW/ventilation.
Explains special functions like holiday mode, temperature-dependent control, and 1x DHW.
Lists compatible systems and limitations when the RM-2 is used as a remote control.
Identifies heating appliances and ventilation units compatible with the RM-2 as a room controller.
Covers restarting the RM-2 and RM-2 Wireless, and details the startup screen and firmware updates.
Illustrates menu navigation, set value correction, program selection, and holiday mode via flowcharts.
Provides flowcharts for adjusting room temperature, menus, program selection, and time programs (day/7-day).
Details the technical data, including IP rating, voltage, battery life, operating conditions, and frequency.
States product compliance with specified standards and relevant EU directives.
Provides product data according to EU Regulation No. 811/2013 for controller functions.
Contains miscellaneous notes or remarks related to the product or manual.
To Next Page
