Wolf RM-2 - Remote Control Functions; Setpoint Adjustment and Program Selection

Remote control functions
26 | WOLF GmbH 3066510_202108
7 Remote control functions
7.1 Set value correction
► Press
+
+
-
-
keys in the standard display
► Set value correction ashes
► The value can be changed with the
+
+
-
-
keys
► Press
to conrm
► Press
to cancel. The RM-2 will also return to the menu
automatically if not used for one minute (RM-2 Wireless: 30
seconds).
7.2 Program selection
► Press key in the standard display
► Select the desired program with
+
+
-
-
keys
► Press
to conrm
► Press
to cancel. The RM-2 will also return to the menu
automatically if not used for one minute (RM-2 Wireless: 30
seconds).
Symbol Function
Standby: Burner and heating circulation pump(s) off, frost
protection ensured
Automatic mode: Heating system uses the time program
(1, 2 or 3) stored in the system controller, applies for both
heating and cooling
Party mode: Permanent heating mode with predened
duration (15 min to 99 h)
Summer mode (heating off), frost protection ensured