Wolf RM-2 - Essential Safety Measures

Safety
3066510_202108 WOLF GmbH | 09
2.3 Safety measures
Never remove, bypass or otherwise disable any safety or monitoring
equipment. Only operate the system if it is in perfect technical
condition. Any faults or damage that impact or might impact safety
must be remedied immediately by a qualied contractor.
► All faulty components must be replaced with original WOLF spare
parts.
2.4 General safety information
DANGER
Electrical voltage!
Danger of death from electrocution.
► All electrical work must be performed by a qualied
contractor.
NOTE
Ensure frost protection
► Do not turn off the mains switch for the heat generator