Wolf RM-2 - Program Selection - Ventilation

Room temperature controller functions
30 | WOLF GmbH 3066510_202108
Symbol Function
HTG + DHW automatic mode
HTG: Switch between heating mode and economy mode
DHW: Switch between set cylinder temperature and
cylinder frost protection
8.5 Program selection - ventilation
► Press key in the standard ventilation display
Settings in line with function as remote control!
Symbol Function
Automatic mode: Switch between reduced ventilation and
nominal ventilation
Example 1 (during time program): Nominal ventilation
Example 2 (not during time program): Reduced
ventilation
Manual mode: Ventilation level remains in effect until it is
changed manually
i
In automatic mode, manual changes to the ventilation
level only apply until the next switching time!