Wolf RM-2 - General Functions; Function Assignment and Key Lock

General functions
3066510_202108 WOLF GmbH | 21
6 General functions
6.1 Assignment of functions
Different conguration options and functions are available depending
on whether the RM-2 is used as a remote control or a controller.
Additional images and information are provided in Section 10.
Functions Remote control Controller
Program selection heating/mixing
circuit
x
Program selection heating/DHW
and/or ventilation
x
Heating curve set value correction x
Adjusting the set room temperature x
Adjusting the ventilation level –
mechanical ventilation
x
Information about the status of the
heating appliance
x x
Display values x x
Congure parameter values x x
Fault display x x
Filter warning – ventilation unit x
Day or week programs for heating,
DHW and ventilation
x
Current time x* x
Setting the time x
Holiday mode x x
1x DHW x
* adopted automatically by system controller programming unit BM or BM-2
i
Information about conguration options and operation
is provided in the owcharts in the Appendix (see
Section 10.2 - 10.5)