Wolf RM-2 - Program Selection - Remote Control

Appendix
3066510_202108 WOLF GmbH | 45
10.2.4 Program selection - remote control
1$ Program selection - remote control. Use the + and - keys to switch
between program selections. The selected value will ash. Use
the tick key to conrm the program selection or the Back key to
discard your changes.
1* Program selection - party duration. If you select this program, you
have to set how long it will remain active. You can do this using
the + and - keys. The value you have selected will ash. Use the
tick key to conrm or the Back key to cancel.
1( Program selection - party active. Identical options to standard
view 1!.The remaining time is displayed under the room
temperature. Program symbol for Party mode ashes when
active. You can exit Party mode by selecting a different program.
The unit will also exit Party mode automatically after the specied
time has passed.