Wolf CFL-WRG - Page 6

6 3065065_201704
Standardsandregulations
Thefollowingstandardsandregulationsapplytotheventilationunits:
- Machinery Directive 2006/42/EC
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- ErP Directive 2009/125/EC
- EN ISO 12100 Safety of machinery;
general design principles
- EN ISO 13857 Safety of machinery;
safety distances
- EN 349 Safety of machinery;
minimum gaps
- EN 953 Safety of machinery;
guards
- VDI 6022 Hygiene requirements for ventilation and
air conditioning systems and units
- EN 1886 Ventilation of buildings;
central air handling units
- DIN ISO 1940-1 Mechanical vibration;
balance quality requirements
- VDMA 24167 Fans; safety requirements
- EN 60204-1 Safety of machinery;
electrical equipment
- EN 60730 Automatic electrical controls
- EN 61000 -6-2+3 Electromagnetic compatibility
- EN 60335-1 (VDE 0700-1) Safety of electrical appliances; general
requirements
- VDI 3803 Central air conditioning systems -
Structural and technical principles
Furthermore, ÖVE regulations and the local building code apply to Austria.
3.Standardsandregulations
Forinstallationandmaintenance,thefollowingstandardsandregulationsmust
beobserved:
- EN 50106 (VDE 0700-500) Safety of electrical appliances; tests
- DIN VDE 0100 Regulations regarding the installation of
high voltage systems up to 1000 V
- EN 50110-1 (VDE 0105-1) Operation of electrical installations
- DIN VDE 0105-100 Operation of electrical installations;
general stipulations
- DIN VDE 0701-0702 Testing following repair and modication
of electrical appliances; repeat testing of
electrical appliances
- VDI 2050 Requirements for technical equipment
rooms; planning and execution
Warnings
Removal and disabling of safety and monitoring equipment is prohibited. Only operate
the system if it is in technically sound condition. Ensure that any faults or damage that
may impact on safety are rectied immediately.