Wolf Link home User Manual

Installation/Electricalconnection
X Please refer to the documentation for each Modbus device for information
aboutinstallationandconguration
X Connect the eBUS cable to the eBUS service connection of your heating
appliance or connect the interface Modul with a two-core lead (cross
section >0.5 mm²) to the eBUS terminals of your heating appliance or
accessory controller. In so doing, pay attention to the polarity.
X You can now use the WOLF Link pro (see instructions on the rear).
X Next, reattach the cover and screw it in place.
Useashieldedcable(CAT5minimum)toconnecttheModbus.
4.4 Decommissioninganddisposal
4.4.1 Decommissioning
X When decommissioning the interface module, follow the installation
sequence in reverse order.
X Dispose of the interface module correctly.
4.4.2 Disposalandrecycling
Appliance
At the end of its service life, do not dispose of the interface module in the
household waste.
X Ensure that the Link interface module and any accessories used are
disposed of correctly.
Packaging
X Ensure that the Link interface module and any accessories used are
disposed of correctly.
KLM-XLair
conditioningventilation
moduleconnection
WOLFPowerSystems
connection
A B COM
-
(B)
GND+
(A)
11
3066086_201803

Wolf Link home Specifications

General

Brand	Wolf
Model	Link home
Category	Control Unit
Language	English